Micro mill - video

**Jon** · Sep 4, 2024, 06:49 PM

Micro mill. By Michel Uphoff. 23:39 video:

**Jon** · Sep 16, 2024, 02:43 PM

Part 2. By Michel Uphoff. 21:56 video:

**Jon** · Sep 23, 2024, 03:20 PM

Part 3. By Michel Uphoff. 33:07 video:

**Jon** · Sep 30, 2024, 05:37 PM

Part 4. By Michel Uphoff. 27:03 video:

**Jon** · Oct 10, 2024, 05:43 PM

Part 5. By Michel Uphoff. 29:34 video:

**Jon** · Oct 18, 2024, 02:15 PM

Part 6. By Michel Uphoff. 27:07 video:

**philippacificnw** · Oct 23, 2024, 04:31 PM

That swivel design is awesome!

I own a very old TAIG MICRO/MINI MILL, it was their First CNC designed UNIT. I never could learn G CODE, so I simply put home built handles on the Servos, which fortunately had a double axis design.

But I quickly learned to FORGET TRYING to angle the headstock, as you point out, the tightening would often CREATE an adjustment, and I finally trammed it perpendicular to the bed and left it that way!

Two decades later, the entire servo control box is so outdated that I would need to redesign the wiring from the old VGA monitor PLUGS, to USB", GET NEW SOFTWARE,

And all that is fine, if I was the AGE that I was when I bought it, but I will always just twist handles!

philip, from the Great Pacific NorthWET, Oregon Division