QCTP 250-007 Replacement Lathe Cutoff Tool Plans

[jjr2001]

I had this carbide tipped cutoff tool that would not fit in the standard 250-007 holder.
A new holder was needed so using one of my new blanks I came up with this:

The original post for making the tool holder blanks is Here:
https://www.homemadetools.net/forum/...r-plans-104972

Cheers,JR

[DIYer]

Thanks jjr2001! We've added your Cutoff Tool Holder to our Machining category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:

Cutoff Tool Holder by jjr2001

tags: tool holder