Free 186 More Best Homemade Tools eBook:  

Get tool plans

Homemade Aerosol Can Recharging


Aerosol Can Recharging
 
186 More Best Homemade Tools eBook
TOOL:
Aerosol Can Recharging
PLANS:
None. For all tools with plans, click here.
BUILDER:
Chris Hayes on youtube.com
DESCRIPTION:
Homemade aerosol can recharging done by introducing compressed air using a custom nozzle.
RATING:
(29)
Post a comment
login / register
May 20, 2016 6:22 AM
Anonymous
THIS WORKSAT PRESSURES OF 100PSI THE CAN SHOULD HAVE NO PRESS IN IT A ONE SECOND SPRITZ OF AIR IS ALL THATS NEEDED. IF THE CAN NEEDS A SECOND SHOT, GIVE IT ONE LATER. ITS NOT INTENDED FOR CANS WITH PRESSURE IN THEM. IF YOU CAN SQUEEZE THE CAN SIDES AND THEY DEPRESS, THIS WILL WORK.COMPRESSOR SHOULD NOT BE RUNNING SO U ''CAN'' HEAR .AIR FLOW INTO THE CAN. TEST AFTER EACH TRY. WHEN YOU GET SPRAY, CEASE TRYING.USE CAN, REFILL AFTER SPRAY STOPS. VERY EASY AND QUICK, JUST DONT OVERDO!
Read all comments
Rate this build:
CATEGORIES:
Miscellaneous
TAGS:
air compressor, aerosol cans
LEVEL OF DETAIL (1-5):
2
URL:
https://www.youtube.com/watch?v=y0asTeFlTck


Newest Forum Posts
  1. Carving a snake into a pencil - GIF by BuffaloJohn on 2024-11-15 14:32:48
  2. Shaking nails into alignment - GIF by Philip Davies on 2024-11-15 13:32:07
  3. Mini Mill - DIY Milling Machine by Jon on 2024-11-15 13:27:54
  4. Media blasting hardwood floors - GIF by Frank S on 2024-11-15 13:16:25
  5. Acme threaded jack clamps - video by Jon on 2024-11-15 13:12:41
  6. Simple roller burnishing tool - video by Jon on 2024-11-15 13:11:38
  7. Rotating welding fixture engine stand - video by Jon on 2024-11-15 13:11:16
  8. Drill press protractor - video by Jon on 2024-11-15 13:10:29
  9. Parking a tractor trailer while walking alongside it - GIF by Frank S on 2024-11-15 13:01:38
  10. Acid washing a swimming pool - GIF by ToolTalkBot on 2024-11-15 12:56:01
DIY Aerosol Can Recharging - comment on how to build a Aerosol Can Recharging - 25 comments
Anonymous says:
May 20, 2016 6:22 AM
THIS WORKSAT PRESSURES OF 100PSI THE CAN SHOULD HAVE NO PRESS IN IT A ONE SECOND SPRITZ OF AIR IS ALL THATS NEEDED. IF THE CAN NEEDS A SECOND SHOT, GIVE IT ONE LATER. ITS NOT INTENDED FOR CANS WITH PRESSURE IN THEM. IF YOU CAN SQUEEZE THE CAN SIDES AND THEY DEPRESS, THIS WILL WORK.COMPRESSOR SHOULD NOT BE RUNNING SO U ''CAN'' HEAR .AIR FLOW INTO THE CAN. TEST AFTER EACH TRY. WHEN YOU GET SPRAY, CEASE TRYING.USE CAN, REFILL AFTER SPRAY STOPS. VERY EASY AND QUICK, JUST DONT OVERDO!
Fudo+1949 says:
Dec 02, 2015 8:31 PM
1. That is a steel can. 2. Two liter P.E.T. bottles do not fail until about 150 psi. 3. Aluminum cans fail at about 130 psi. 4. Again, that is a steel can. 5. Shipping temps can exceed 130 degrees F. At those temps the propellant used in most cans is at about 200 psi. 6. If that compressor is putting out 200+ psi you have more problems than a can splitting at the seam.
normlf says:
Nov 27, 2015 4:08 PM
Not smart.....those cans were not designed to propel material with high pressure and could be on the edge of busting. The propellants used are liquid under pressure....like Freon or propane....and generate enough pressure to push the liquid out but it is the expansion of the propellant to a gaseous state that atomizes the liquid to be sprayed.....push the air pressure a bit too high and you'll have a bomb in your hands.....don't do it!
ken carter says:
Nov 23, 2015 2:35 AM
interesting
chino says:
Oct 02, 2015 7:34 PM
Me, gusta.. Por seguridad es bueno pre calibrar una presión de trabajo máxima.
Related Homemade Tools:
Next →
← Prev


Get tool plans


Signup for our newsletter and get the 186 More Best Homemade Tools eBook free!